This is specific display for 3d printer lcd screen, it is large size with 5.96" in diagonal, with 1620 x 3 x 2560, 2K monochrome lcd screen, 6% high transparency than other common color lcd screen, long life time under the extremely UV light condition, high efficiency and fast curing time than other lcd screens. It is EDP interface and free viewing angle. we could provide the driver board for the 5.96" UV lcd masking screen.
Size | 5.96" |
Resolution | 1620 x 2560 |
Technology Type | α-Si TFT |
Pixel pitch(um) | 50 x 50 |
Display mode | Transmissive, Normally Black,monochrome tft |
Surface Treatment | HC+HC |
Viewing direction | ALL |
LCM sizes(W x H x D)mm | 84.6x 135.85 x 1.08 |
Active area (mm) | 81x 128 |
Touch panel | No |
LED backlight | No |
Color Gamut | Mono |
FPC connector | FH52-30S-05SH |
Operating temperature | 0~70° C |
Storage temperature | -10~80 °C |
Transmissive ratio | 6% (@405nm) |
Find more LCD display for 3D printer:
8.9" 3D printer lcd screen:
https://www.szmaclight.com/product/3D-printer-lcd-display-module-8-9.html
13.3" 3D printer lcd display:
https://www.szmaclight.com/13-3-TFT-LCD-screen.html
What is 3D printer lcd masking screen:
3D printer lcd screen is used in 3D printer masking display, the 3D printer UV lcd screen display the image or pattern that you would like to printer by resin, after the UV light go across the lcd screen, then resin materials is cured throungh the UV light from 3D printer lcd screen, the 3D printing pattern is changed from the image on the 3D printer lcd screen.
What is the best 3D printer UV lcd screen:
The 3D printer lcd screen is used under the extremly UV light environment, it bring high challenge to the life time of LCD screen, because the regular LC materials is hard to stand the strong UV light for a long time, a traditional lcd screen might be only stand 500 hours under strong UV light environment, while the 3D printer lcd screen, it takes anti-UV materials to make the screen, it can stand more than 5000 hours under extremly UV light environment.
The transmissive ratio of 3D printer lcd screen is also very import for industrial 3D printer, a high transmissive ratio of 3D printer lcd display can speed up the curing time of 3D printer. if use the trandistional TFT lcd screen as 3d printer lcd display, its curing time would be around 15s, while if use 3D printer lcd screen, it curing time only 1~2s, because 3d printer lcd display has high transmissive ratio than traditional lcd screen.
The high resolution of 3D printer lcd screen is also important, the high resolution would bring higher texture quality that you printing.
Can i use the color tft lcd screen for my 3D printer lcd masking screen:
No, we don't suggest. because the common color tft lcd screen has one more color filter layer than monochrome UV TFTlcd screen, that it is hard to reach the tranmissive ratio and the curing time that you need, and its life time is shorter under extremly UV light.
So if you are seeking 3D printer lcd screen, please contact us for the specific 3d printer lcd screen, our 3d printer lcd screens have 13.3" , 8.9" and 6.08", that with high resolution, high transimissive ratio and long life time than others.
Welcome to contact us at : [email protected]
Tel: +86-755-27205930 / 36613676
Email: [email protected]
Add: No.615,C Zone,Mingyou Purchasing center,Baoyuan Road,Baoan District,Shenzhen,China