UV lcd masking screen 13.3 inch is 4k monochrome lcd for 3D printer display, it is large size with 13.3" in diagonal, with 3840 x 2160 (UHD, 332PPI) 4k high resolution, 6% high transparency than other common lcd screen, long life time under the extremely UV light condition, high efficiency and fast curing time than other lcd screens. it is ideal solution for 3d priner lcd screen, It is EDP interface and free viewing angle.
|Size||13.3" monochrome lcd|
|Resolution||3840 x 3 x 2160 (UHD, 332PPI)|
|Technology Type||α-Si TFT|
|Pixel pitch(um)||76.5 x 76.5|
|Display mode||Transmissive, Normally Black,monochrome tft|
|LCM sizes(W x H x D)mm||302.36 x 176.94 x 1.228|
|Active area (mm)||293.76 x 165.24|
|Connector type:||IPEX 20455-040E-66|
|Operating temperature||0~60° C|
|Storage temperature||-20~80 °C|
|Transmissive ratio||6% (@405nm)|
Interface of 13.3" 4K monochrome lcd screen for resin 3D printer:
|3||LAN3_N||Main link lane3 negative input|
|4||LAN3_P||Main link lane3 positive input|
|6||LAN2_N||Main link lane2 negative input|
|7||LAN2_P||Main link lane2 positive input|
|9||LAN1_N||Main link lane1 negative input|
|10||LAN1_P||Main link lane1 positive input|
|12||LAN0_N||Main link lane0 negative input|
|13||LAN0_P||Main link lane0 positive input|
|15||AUXCHP||AUX channel positive input/output|
|16||AUXCHN||AUX channel positive input/output|
|18||LCD_VCC||LCD logic and driver power|
|19||LCD_VCC||LCD logic and driver power|
|20||LCD_VCC||LCD logic and driver power|
|21||LCD_VCC||LCD logic and driver power|
|22||BIST_EN||Bist mode enable|
|27||HPD||HPD signal pin|
|35||NC||No connection (SCL), Leave this pin open|
|36||NC||No connection (SDA), Leave this pin open|
Find more LCD display for 3D printer:
8.9" 3D printer monochrome lcd screen:
5.96" 3d printer lcd display:
What is 3D printer UV lcd masking screen:
3D printer lcd maksing screen is used in 3D printer mask display, it work as a lcd shutter when in display, the 3D printer lcd screen display the image or pattern that you would like to printer, after the UV light go across the lcd mask screen, then resin materials is cured throungh the UV light from 3D printer lcd screen, the 3D printing pattern is changed from the image on the 3D printer lcd screen.
What is the best 3D printer lcd masking screen:
A good lcd masking screen that used for 3D printer would require high transparancy ratio, longer anti-UV life time, high resolution.
The 3D printer lcd screen is used under the extremly UV light environment, it bring high challenge to the life time of LCD screen, because the regular LC materials is hard to stand the strong UV light for a long time, a traditional lcd screen might be only stand 500 hours under strong UV light environment, while the 3D printer lcd screen, it takes anti-UV materials to make the screen, it can stand more than 5000 hours under extremly UV light environment.
The transmissive ratio of 3D printer lcd screen is also very import for industrial 3D printer, a high transmissive ratio of 3D printer lcd display can speed up the curing time of 3D printer. if use the trandistional color TFT lcd screen as 3d printer lcd display, because the color filter inside the color tft, its curing time would be around 15s, while if use Macklight monochrome lcd masking screen for 3D printer , it curing time only 1~2s, because monochrome tft without color filter layer, that it increased the transparency ratio of LCD masking screen, less explosure under UV, that means with longer UV life time than color tft lcd panel, and lower cost and high UV curing efficiency in the industrial application.
The high resolution of 3D printer lcd screen is also important, the high resolution would bring higher texture quality that you printing. so the UV LCD mask resolution is very important parameters, the higher resolution lcd masking screen, can print to high precision product, especially for industrial application. Macklight 4k monochrome UV lcd masking screen would be the ideal choice for the 3D printer lcd masking screen.
Why we use 4k monochrome lcd for my 3D printer lcd screen:
Because the common tft lcd screen can not reach the tranmissive ratio and the curing time that you need, and its life time is shorter under extremly UV light.
So if you are seeking 3D printer lcd screen, please contact us for our 4k monochome lcd that specify designed for 3d printer lcd screen, our 3d printer lcd screens have 13.3" , 8.9" and 6.08", that with 4k high resolution, high transimissive ratio and long life time than others.
Welcome to contact us at : [email protected]
Tel: +86-755-27205930 / 36613676
Email: [email protected]
Add: No.615,C Zone,Mingyou Purchasing center,Baoyuan Road,Baoan District,Shenzhen,China